Nowadays, scrolling light boxes have spread all over the city, and have been widely used in community bulletin boards, squares, bus shelters, airport passages, shopping plazas, exhibition centers and other places.
Compared with ordinary light boxes, scrolling light boxes can be personalized according to style and environment of different places. Their efficient, energy-saving and environmentally friendly features are deeply favored by advertisers.
In order to achieve ideal effect of advertising scrolling light box, it is particularly important to do a good job in the early installation work. This article introduces you to the installation tips of scrolling light box rolling system.
Scrolling light boxes components installation tips
Correct opening direction of installed scrolling light box square seat should be towards front or rear, never up and down.
Scroll with holes should be in same direction as upper and lower movement. If scroll is too long, cut end can be set to non-hole end.
Control lighting system adjustments
It is recommended that power load of ten lamps installed in lighting control system be set to 400 watts.
To avoid burning out lighting control system, do not pull lamp manually or forcefully rotate the reel.
When circuit is connected, reel rotates naturally. If you want to adjust lighting system, you can only use controller to adjust it.
The reel can be rotated by hand only after power is turned off.
Key points for installing scrolling light boxes holder
In order to avoid phenomenon of graphic deflection, curling and falling off, when installing scrolling light boxes, 4 fixing seats of light box should be drilled and installed horizontally on inner wall of light box frame.
Check light box wiring to prevent electric shock
After turning on AC power of scrolling light box, first check whether indicator light of 24VDC iron case power supply is on.
If indicator light is on, it means that system power supply is powered.
To prevent electric shock and injury during subsequent operations, be sure not to touch each terminal block of AC contactor of iron case power supply.
Conclusion
Above are installation tips and key points of scrolling light boxes rolling system.
