- Determine installation location of magnetic light boxes and confirm whether load-bearing capacity of wall meets requirements.
- Prepare installation tools: electric drill, ruler, wall fixing screws and expansion tubes…… etc.
- Take out magnetic light box, check whether there is any damage to light box, and determine size and weight of it.
Installation method
Use an electric drill to drill holes in the wall
According to size and weight of magnetic light boxes, drill holes on the wall that match size of screws.
Install wall screws to the wall
Insert wall fixing screws into drilled holes and tighten them with a screwdriver.
Fix magnetic light box
Place light box equipped with magnets on fixing screws, observe whether light box is level, and tighten fixing screws.
Test manetic light boxes
Plug magnetic light box into power source and test whether light box can emit light normally.
Precautions
- Magnetic light box should be installed on a flat wall with strong load-bearing capacity. You can consider using a special wall bracket.
- During installation, make sure that surface of magnetic light box is clean, dry, and smooth to avoid stains and dust from sticking to surface of light box.
- If installation location is humid, moisture-proof measures must be taken and light box must be cleaned regularly to increase service life of magnetic light box while ensuring safety.
- If you need to change position of magnetic light box or disassemble light box, you should use professional tools to prevent safety accidents.
- When using magnetic light boxes, you should pay attention to brightness and usage time of light to avoid unnecessary waste of energy.
Conclusion
Installation steps of magnetic light boxes are not complicated. As long as you pay attention to a few key points, installation can be completed quickly.
If you still have questions about installation process, you can refer to user manual or contact us for consultation.
