During installation process of soft film tension fabric light box, there is often an excess of soft film silicone strips, causing soft film tension fabric light box to be unable to display a tight graphic.
In fact, this is not due to substandard specifications of soft film production, but due to incorrect installation methods.
Let me share with you how to correctly install tension fabric light box.
Install tension fabric light box correctly
Fix light box profile on the wall
Install main profile of soft film tension fabric light box, and then fix it onto the wall.
Soft film eight-point positioning
Eight-point positioning of soft film is completed in two steps:
- 1st step is to nest silicone strips at four corners of soft film into four corners of aluminum alloy frame.
- 2nd step is to nest middle part of four sides of soft film with middle slot of four sides of aluminum alloy frame.
Failure to do a good job in positioning is the key to failure of soft film installation to close completely.
If soft film is nested along each aluminum alloy frame in sequence, unbalanced pulling of soft film will cause soft film to stretch too much, causing soft film to fail to close seamlessly.
Eight-point positioning method scientifically distributes elasticity of each part of the soft film
Hair dryer auxiliary
Use a hair dryer to heat and soften silicone strip, mainly for soft film in sealing area. This area often encounters a particularly tight situation. At this time, we can easily complete the sealing with help of a hair dryer to soften silicone strip. Silicone strips in other parts can be sealed by hand. Just press it, it’s effortless.
Conclusion
Above is the correct way to install tension fabric light box.
